Is your hardware a or a Lexia 3 clone device? Share public link
If you need help tracking down specific driver files or configuring your diagnostic software, let me know. To help me give you the best advice, could you tell me: What is your laptop running?
Windows binds the driver configuration to the specific physical USB port you used during setup. Plugging the tool into a different port might trigger a re-installation loop.
Plug the interface into a USB 2.0 port (black plastic tab, not blue). If your laptop only has USB 3.0 ports, use a cheap USB 2.0 hub between the laptop and the interface to step down the controller compatibility. Use the PSA Interface Checker tool to update the firmware to match your Diagbox version. Best Practices for Stability actia psa interface driver
The Actia interface was originally designed for Windows XP and Windows 7 32-bit. This is where most installation headaches begin.
Background and purpose
If unrecognized, it will appear under Other Devices as with a yellow exclamation mark. Is your hardware a or a Lexia 3 clone device
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The ACTIA PSA Interface Driver is a software solution developed by ACTIA, a leading provider of automotive diagnostic solutions. The driver is designed to facilitate the communication between the ACTIA diagnostic tool and the vehicle's ECUs, enabling technicians to perform various diagnostic functions, such as fault code reading, parameter measurement, and ECU calibration.
used for diagnosing Peugeot, Citroën, DS, and Vauxhall vehicles Windows binds the driver configuration to the specific
| Interface Type | Recommended Driver | Notes | | :--- | :--- | :--- | | Genuine Actia (pre-2010) | v5.0.1 | Works with XP/Vista | | Genuine Actia (2010+) | v6.0.3 | Stable on Windows 7/8 | | Rev B Clone (Full Chip) | v6.0.0 or 7.04.06 | Best for DiagBox 7.x | | Rev C Clone | v7.02 or newer | Windows 10/11 compatible |
The Actia XS Evolution interface relies on a USB-to-serial connection to bridge your car’s OBD2 port with your laptop. Over the years, the hardware firmware and software ecosystem have evolved, creating specific compatibility requirements:
Actia PSA Interface Driver: The Complete Installation and Troubleshooting Guide