Aodelan Wtr2 User Manual Official

Navigate to . Press SET . Adjust the timer to display 00:00:05 (5 seconds). Press SET .

Which specific (time-lapse, bulb, or simple remote) are you trying to configure?

Follow these steps to connect the WTR2 system to your camera.

If the transmitter LED blinks but the receiver does not react, verify that both units share the exact same channel number. aodelan wtr2 user manual

To capture 300 photos, taking one photo every 5 seconds, starting immediately:

Specific to your camera brand (e.g., Canon, Nikon, Sony).

Press the button; the selected parameters will begin to flash. Navigate to

Transmitter (up to 3 years standby); Receiver (up to 400 hours standby)

The Aodelan WTR2 is a compelling entry-level turntable for casual vinyl listeners and newcomers—offering attractive styling, practical connectivity, and acceptable sound for most users. While it cannot match mid- or high-end decks in fidelity, a few targeted upgrades and sensible setup choices can substantially improve its performance, making it a versatile gateway into analogue listening.

Plug the other end of the cable into the remote shutter socket on your camera. Press SET

If the units are not communicating, press and hold the receiver's power button and shutter button simultaneously for 2 seconds until the LED indicator blinks rapidly, indicates Manuals+.

The receiver unit features a shutter button, enabling it to act as an on-camera wired remote. Technical Specifications

Insert two AAA batteries into both devices.

(Note: AAA batteries for the transmitter and CR2 batteries for the receiver are typically purchased separately.) ⚙️ Device Layout and Interface