Canon Ir 2425 Service Manual Install Jun 2026

Plug the machine directly into a dedicated, grounded wall outlet. Do not use extension cords or power strips. The voltage requirement is typically 220–240V or 120V depending on your region. Electrostatic Discharge (ESD) Protection

Ensure the power supply is stable. Enter Service Mode ➡️ FUNCTION ➡️ CLEAR ➡️ ERR to reset the code, then restart the machine. If it recurs, check the fuser lamp continuity. E110 (Scanner Motor Error)

Maintain a stable temperature between 10°C and 30°C (50°F to 86°F) and humidity between 20% and 80% RH.

: Log in to configure restricted settings. Default Username : Administrator Default Password : 7654321 canon ir 2425 service manual install

A 2.35MB document focusing on initial setup.

If the installation fails during initial startup, the machine will display an alphanumeric service code (E-Code). Use this breakdown of common setup errors to quickly diagnose the root cause: Error Code Structural Cause Diagnostic / Corrective Action Fuser assembly failed to reach operating temperature.

Fuser assembly errors. Usually triggers if the fuser does not reach the proper temperature during boot. Check the sub-thermistor and fuser lamp connections. Plug the machine directly into a dedicated, grounded

Use “the” if referring to the specific official manual’s installation process.

What (Windows, Mac, Linux) will the users be printing from?

: Do not install near water sources, heaters, or in direct sunlight. E110 (Scanner Motor Error) Maintain a stable temperature

Ultimate Installation and Maintenance Guide: Canon imageRUNNER 2425 Service Manual Workflow

Fan the paper stack to prevent jams, then load it with the printable side facing up.

For many Canon models, the factory default System Manager ID and PIN are 7654321 .

The official installation procedure for the Canon imageRUNNER (iR) 2425

Shake the new toner cartridge horizontally 5 to 6 times to distribute the powder evenly inside.