Ambient temperature exceeded 43°C. Improve room ventilation. Ultra-high water temperature
Fill the water tank until the water level gauge needle enters the green zone . 3. Water Pipe Connections
Keep the chiller running continuously, even when the laser is idle.
Press any button on the T-507 controller to mute the audible buzzer. However, the error code will remain visible until the root cause is resolved. 6. Preventative Maintenance Schedule cwfl-6000 manual
Use purified water, distilled water, or deionised (DI) water . Never use tap water, as mineral buildup will clog the laser's internal cooling channels.
Allows the user to set a fixed temperature (ideal for environments with extreme temperature swings). How to Change Temperature Settings: Press and hold the "SET" button. Use the up/down arrows to navigate parameters. Adjust the value and press "SET" again to save. ⚠️ Common Alarm Codes
Open the drain valve at the bottom of the chiller and empty the tank completely. Flush the tank with fresh distilled water once. Ambient temperature exceeded 43°C
Insufficient cooling, heavy laser load, or faulty compressor.
This dual-channel design prevents condensation on the laser optics while ensuring the laser source remains at a stable operating temperature. Specification (Typical) ~15kW to 18kW Temperature Stability Voltage 3-Phase 380V/415V/460V Refrigerant R-410a / R-407c 2. Installation Checklist
Cooling failure. Clean dust filters, check refrigerant levels, or reduce laser load. Ultra-low water temperature However, the error code will remain visible until
Do you need the exact for the signal alarm output?
Standard ; sensitive to voltage stability. Refrigerant