Everstart Battery Charger 60108m Manual Site

The unit detects the battery voltage and adjusts the charging rate accordingly.

Because this is a manual charger, you must monitor the battery's state of charge. Overcharging will damage the battery and can cause a dangerous thermal runaway. Control Panel and Key Features

Note: Always verify the label on your specific unit, as Walmart has released slight variations of the 60108m model over the years.

The manual for the 60108M emphasizes safety through digital safeguards. It includes , which triggers an alarm and refuses to charge if you accidentally swap the red and black clamps . everstart battery charger 60108m manual

clamp to the negative (-) battery terminal or a metal part of the vehicle chassis away from the battery.

Used for larger batteries, such as those in diesel vehicles or marine applications, and for faster recovery. Start Aid/Boost Mode:

Indicates poor connection, reversed polarity, or a damaged battery. 5. Troubleshooting Common Issues The unit detects the battery voltage and adjusts

: Shows output current and battery status. The battery icon bars will fill from empty to solid as charging progresses. Start Aid/Boost Mode

: Unplug the AC cord first, then remove the Black (-) clamp followed by the Red (+) clamp [6]. ⚠️ Common Error Codes

It is specifically intended for lead-acid batteries (including the newer AGM types) found in standard cars, trucks, motorcycles, and boats, and should be used with Lithium-ion or other battery chemistries. Control Panel and Key Features Note: Always verify

Eliminate extension cords; allow device to cool down before restarting. Battery is severely discharged or has a shorted cell

Tip: Connect a good battery in parallel with the dead battery for a few minutes using jumper cables to raise the voltage enough for the charger to detect it.