Iprog Rework ★ Hot

| Tool | Purpose | |------|---------| | (e.g., FT232RL, CP2102) | Serial communication with IProg’s bootloader | | Soldering iron & fine tip | Connecting to test points or UART pads | | Jumper wires (female-to-female) | Temporary connections | | PC with Windows 7/10 | Running IProg rework tools | | Original firmware file ( .bin or .hex ) | For reflashing | | IProg Rework software (e.g., IProg_Rework_Tool.exe , STM32_Flash_Loader ) | To write firmware | | Multimeter (optional) | Check voltage levels (3.3V logic) |

Swap out any electrolytic capacitors that look suspicious or have low capacitance ratings. iprog rework

Weak capacitors failing to filter noise during high-load operations (e.g., Motorola MCU programming). | Tool | Purpose | |------|---------| | (e

Q: Can iProg rework stations be used for lead-free solder? A: Yes, iProg rework stations can be used for lead-free solder, but the temperature profile may need to be adjusted. A: Yes, iProg rework stations can be used

Do you have experience with ? Share public link

: The MC34063AG converter often has resistors with values that are too high, limiting current too early. Ideal Value : 0.22 Ohm .

Would you like a pinout diagram for a specific IProg clone version or help extracting a firmware backup?