Check behind the mounting surface to ensure no factory wiring, fuel lines, or airbags will be damaged. Drill 1/4-inch holes at the marked locations.
: An internal coin-cell battery maintains the date and time for the unit’s audit trail. storagemunicibidpro.blob.core.windows.net 3. Software Setup & Programming Administrative Software knox keysecure 3b installation manual hot
The unit can be mounted in a vehicle or surface-mounted to a solid interior wall. Check behind the mounting surface to ensure no
| Temperature Range | Action Required | |------------------|------------------| | 25–30°C (77–86°F) | Standard operation, ensure front-to-back airflow unobstructed. | | 30–35°C (86–95°F) | Reduce adjacent equipment density. Check fan speed via CLI: show system environment | | >35°C (>95°F) | – The 3B will throttle performance and may shut down. | storagemunicibidpro
Check the inline 5-amp fuse on the red wire. Check the voltage at the 6-pin connector pin 1 to ensure it reads between 11V and 16V DC. Verify the chassis ground wire is connected to clean, unpainted metal.
The KeySecure 3B requires a clean, unswitched 12V DC power source to guarantee that emergency keys can be retrieved even when the vehicle ignition is turned off.