Lovato 31 Rgam 12 User Manual

: Programmable parameters and event logging (up to 255 events). 2. Technical Specifications Feature Supply Voltage ( Uscap U sub s ) 12VDC or 24VDC (nominal) Operating Range (12V) 6.2 – 16.5VDC Operating Range (24V) 13 – 33VDC Mains Voltage Range 70 – 624VAC Rated Frequency 50 or 60Hz (keypad configurable) Tripping Adjustments Min: 0.7-1 Uecap U sub e ; Max: 1-1.2 Uecap U sub e 3. Operating Modes The controller features four primary operational states: OFF : The unit is disabled; no automatic actions occur.

: Consulting and modifying setup parameters protected by password access.

Lovato 31 RGAM 12 User Manual: The Complete Installation & Programming Guide

Features a 3-digit LED display for readings (voltage, frequency, battery, hours) and 16 status LEDs. Remote Monitoring: lovato 31 rgam 12 user manual

: Features a 3-digit display for readings (Voltage, Battery, Hours) and dedicated LEDs for engine status, glow plug pre-heating, and alarm states. Connectivity

Some versions support "Autocall" functions for sending status notifications via SMS or email.

Integrated monitoring sensors for oil pressure, engine temperature, overspeed, and battery voltage. : Programmable parameters and event logging (up to

Engine underspeed or bogging down under premature electrical loads. Generator Overload Condition

The is a microprocessor-based control unit specifically engineered for standby generating sets. Its primary function is to automatically manage the starting and stopping of a generator in the event of a mains power failure and to oversee the changeover of the electrical load between the two sources. This process is known as Automatic Mains Failure (AMF), a core feature of the RGAM series. The "31" in its model number denotes the base RGAM model, while "RGAM 12" indicates it operates on a 12VDC auxiliary supply. This is a standard version where you can program all parameters directly using the keypad on the unit's front panel.

The 31 RGAM 12 includes built-in auxiliary contacts: Remote Monitoring: : Features a 3-digit display for

Disclaimer: This article serves as a general overview. Always consult the physical printed manual provided by Lovato Electric for specific wiring diagrams and safety warnings relevant to your hardware revision.

: The unit monitors the mains voltage. If the voltage fails or goes out of preset limits, the unit automatically starts the generator and switches the load. It returns to mains power and stops the generator once stable utility power is restored.