Version 8.10.00 sits at a transition point for Rockwell licensing. It supports both the classic master disk system and the newer digital FactoryTalk Activation. The Master Disk System
When an activation is moved from the physical Master Disk to a host computer's hard drive (usually the C: drive), a hidden, system-protected directory named EVRSI.SYS is created at the root level. Inside this directory lies the actual license token file, typically named 386HPST.RSC . The Move Mechanics
A master disk is a type of storage device that contains a complete and verified copy of a control program. In the context of RSLogix 500, a master disk is used to store the program and configuration data for a PLC. The master disk serves as a backup of the program and can be used to restore the PLC to its original configuration in case of a failure or error. rslogix 500 81000 cpr9 w master disk verified
: Once moved, you can verify the status by going to Help > About RSLogix 500 within the software. It should show a registered serial number rather than "Evaluation Mode".
Natively supports Windows XP (SP3) and Windows 7 (32-bit and 64-bit). Windows 10 and 11 environments require specific compatibility troubleshooting or virtual machines. Version 8
Run Setup.exe from your RSLogix 500 v8.10.00 installation media. Follow the on-screen prompts. Input your 10-digit serial number when requested.
Historically, RSLogix 500 used hidden files on a physical 3.5-inch floppy disk (the "Master Disk") to unlock the software. Inside this directory lies the actual license token
The term "verified" in the context of a master disk refers to the process of checking and confirming that the data on the disk is accurate and complete. A verified master disk ensures that the program and configuration data on the disk is correct and can be used to restore the PLC without any issues. In the case of RSLogix 500 81000 CPR9 w Master Disk Verified, the master disk has been thoroughly checked and verified to ensure that it contains a complete and accurate copy of the control program.
To activate the software, users ran a utility called Move'em or EvMove .
