Stenhoj Ds2 Manual Jun 2026

If the electronic synchronization system fails, the control board will cut power to prevent the vehicle from tilting. Check the synchronization sensors in both columns. Excessive Noise During Operation

Electro-mechanical lifts rely on physical thread contact between a drive nut and a safety nut. Regular lubrication and inspection are mandatory. Daily Checks

The robust mechanical nature of the DS2 means problems are often identifiable and solvable with patience.

On page 32, the manual includes a specific warning for cold climates. The DS2 uses a water-based dust suppression system (if equipped). if temperatures drop below 32°F (0°C). Expanding ice will crack the polyethylene tank, which is an expensive, non-warranty replacement. stenhoj ds2 manual

Once fully lowered, swing the arms out to the sides. Exit: Drive the vehicle carefully out of the bay. Safety Protocols Never exceed the maximum rated weight capacity. Never override or bypass the safety limit switches. Always use proper vehicle manufacturer lifting points. Wear steel-toed boots and safety glasses in the bay.

Check out these demonstrations of the engineering and stability behind modern Stenhoj lifting systems: AUTOPSTENHOJ Maestro 2.35 NxT_EN AUTOPSTENHOJ GmbH AUTOPSTENHOJ inground lifts - Benefits & Features AUTOPSTENHOJ GmbH

3-phase 400V (standard) or 1-phase 230V (optional). Overall Width: Varies by installation setup. Pre-Installation Requirements If the electronic synchronization system fails, the control

Must be placed on a firm, sustainable concrete foundation (typically B 4710-1 standard).

The manual identifies this as a possible "feedback loop failure." Check the emergency stop auxiliary contact—if it’s open, the DS2 will suppress outputs even with a valid radio signal.

For easy reference, we've included quick access links to the following sections of the Stenhoj DS2 manual: Regular lubrication and inspection are mandatory

The "DS2" is not a single, monolithic model. Over its decades of production, several variants were manufactured to suit different lifting capacities and configurations. Understanding your specific model is the first step to finding the right manual and spare parts.

Inspect the safety nuts for wear (very important for electro-mechanical lifts). Check electrical connections.