It looks like there's no response available for this search. Try asking something else.
Total watt ceiling protection (Adjustment range: 0W–120W, default 81W). Maximum Capacity
: Do not bridge or short-circuit the IN- and OUT- terminals. They must remain completely separated; shorting them bypasses the internal current-sensing shunt, disabling the Constant Current (CC) limiting feature and potentially destroying the hardware. 🖥️ Interface and Display Modes Zk-5kx Manual
Displays input/output voltage, current, power, capacity (Ah), energy (Wh), and running time.
Need the official PDF? Copy the device serial number (on the bottom label) and visit support.zkteco.com. For urgent issues, consult your local system integrator. It looks like there's no response available for this search
In the main display, serves as a master switch to turn the module's output on or off. When disabled, the display will show "OFF," even if the module remains powered. This is particularly useful for safely connecting loads before applying power.
| Specification | Details | | :--- | :--- | | | 6.0V - 36V DC | | Output Voltage | 0.6V - 36V DC (adjustable) | | Output Current | 0 - 5A Max (4A for long-term stable work) | | Output Power | 80W Max (natural heat dissipation ~35W, forced cooling ~50W) | | Display Resolution | Voltage: 0.01V; Current: 0.001A | | Conversion Efficiency | Approximately 88% | | Protections | Input reverse connection, output backflow prevention, undervoltage, overvoltage, overcurrent, overpower, overtemperature, timeout, and overcapacity | | Cooling | Intelligent temperature-controlled fan (activates >50°C or >1A) | | Dimensions | Approx. 79 × 43 × 48 mm | Maximum Capacity : Do not bridge or short-circuit
: Route wires from the OUT+ and OUT- terminals directly to your device or battery.
The ZK-5KX is robustly protected, but understanding these features helps in troubleshooting:
Set specific values for LVP (Input Undervoltage), OVP (Output Overvoltage), OCP (Overcurrent), and OPP (Overpower).