Zkteco Ua300 Factory Reset | DELUXE | 2026 |

Do you need to before erasing the device?

Method 3: Bypassing a Lost Admin Password (The Tamper Switch Trick)

: If you still have access to the device, download all logs and user data via ZKTime Net, ZKBio Access, or a USB flash drive before proceeding. Method 1: Reset via the Device Menu (Admin Access Required) zkteco ua300 factory reset

If you have administrator access to the device keypad, this is the most straightforward method. Step 1: Access the Main Menu Press and hold the key for 3 seconds.

There are three distinct approaches to resetting the ZKTeco UA300: a (if you have admin access), a manual hardware reset using a jumper, and a password recovery method for when you're locked out. Do you need to before erasing the device

While a factory reset should be a last resort, there are several scenarios where it's the most effective solution:

If you want, I can produce: (A) the exact menu path and screenshots for firmware vX.X (tell me firmware version), or (B) step‑by‑step photos/diagram references from the UA300 service manual. Step 1: Access the Main Menu Press and

: All IP addresses, gateway configurations, and Wi-Fi/Ethernet settings will revert to default values.

You can now proceed to Method 1 if you still want to complete a full factory reset. Post-Reset Configuration Checklist

Use this method if you still have administrator access to the device menus. Step 1: Open the Main Menu