Zte F689 Bridge Mode Exclusive _top_ ◎ ❲Top-Rated❳

Note: Before making changes, take a screenshot of your current WAN settings, especially the , as you will need this for your new router.

Power on the ZTE F689 and wait two minutes for the fiber connection to stabilize. Power on your personal router. Log into your personal router's management dashboard.

Uncheck to prevent IP conflicts with your new router. Click Apply . 🔗 Connecting the Secondary Router

: PPPoE (requires username and password) or Dynamic IP/DHCP.

To configure the ZTE F689 in Bridge Mode Exclusive, follow these steps:

Navigate to > WLAN and toggle both the 2.4GHz and 5GHz wireless networks to Off .

: admin or admintelecom (or check the sticker on the bottom of your device). 2. Record Your Connection Settings

:

If your ISP requires authentication, set the WAN type to PPPoE and enter your internet username and password. 🔍 Troubleshooting and Verification

Check the box for (or whichever physical port you plan to connect to your third-party router). This tells the ZTE F689 to send the bridged data strictly through that specific port. Save your changes. Step 5: Disable Wi-Fi and DHCP